The B&M Nitrous Holeshot 3600 Torque Converter, Part #20482 is for 1965 to 1991 General Motors TH375, TH400 & TH425 automatic transmissions and 1968-1981 GM TH350/TH375B transmissions but does not fit GM TH350C models with locking torque converter.
The Nitrous Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The Holeshot converter allows the engine to launch the car at higher rpm where more torque is available.
Recommended for Street Rod, Pro Street, and Street Machines with Plate Type Nitrous Systems Nitrous engines produce some serious horsepower and require a serious torque converter to handle it. Built with the same features as the other B&M Holeshots with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers. Converters with higher than stock stall speed will allow the vehicle to accelerate better from a dead stop and it will allow the vehicle to idle better when a big cam is used. When nitrous is used the Nitrous Holeshot is your only real choice.
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- New Springs/Rollers In Stator
- Heavy Duty Needle Bearings
- New Turbine Hub
- Pressure Tested
- Anti-Balloon Plates
Ideal for serious performance street cars looking for serious performance.
B&M Nitrous Holeshot Torque Converters Best Deals
The B&M Nitrous HoleShot Converter is the strongest of the B&M street converter line-up. These converters will take the "instant hit" abuse of plate-type nitrous systems and are also tough enough to handle the high power and torque of big cubic inch crate engines. All Nitrous HoleShot converters are completely balanced with full furnace brazed impeller and turbine, heavy duty needle type thrust bearings, new turbine hubs and anti-balloon plates. Ideal for serious performance street cars looking for serious performance.
•Rated up to 700 HP/550 Ft-Lbs
•Furnace brazed impeller and turbine
•New precision steel pump drive tube
•New heavy duty needle bearings used instead of thrust washers
•New springs and rollers in stator
•Dual pattern drive lugs on some GM HoleShots
•New turbine hub
•Not to be used with trans brake.
•Recommended to install a supplementary transmission oil cooler and transmission temperature gauge to monitor additional heat build up.
RPM Ranges for B&M Nitrous Holeshot Torque Converters:
•Nitrous Holeshot 2400: 2300-2500 RPM
•Nitrous Holeshot 3000: 2800-3200 RPM
•Nitrous Holeshot 3600: 3400-3800 RPM
B&M Torque Converters Lowest Prices
B&M® Racing & Performance has been at the vanguard of the growing automotive aftermarket since the early 1950s. Racers themselves, B&M’s founders identified the needs of local racers and street performance enthusiasts, and developed products to fill those needs. As the industry grew so did B&M. And as racers went faster, B&M developed products to help them break the records they just set.